H13 H14 V-Bank HEPA filter With Plastic Frame
Material:Ultra-Fine Glass FiberFilter Type:
Car Fitment: /
Size: Customers\' Require
Color Customers\' Require
Package: Customized/Neutral
Filtration Efficiency: H13,H14
Sample: Avialable/Free
Place of Origin: CHINA
H13 H14 V-Bank HEPA filter With Plastic Frame
H13 H14 V-Bank HEPA filter With Plastic Frame refers to the H13 H14 V-Bank HEPA filter with a (18mm) or 16(mm) thick plastic frame.
H13 H14 V-Bank HEPA filter frame is divided into: plastic frame, galvanized frame, aluminum frame, stainless steel frame, etc. H13 H14 V-Bank HEPA filter With Plastic Frame is commonly used.
H13 H14 V-Bank HEPA filter With Plastic Frame is suitable for use in research and production departments with various processes requiring cleanliness below 100,000 (dust particles <0.5μm). Because this filter has good bacteria filtering performance, it is especially Suitable for pharmaceutical industry, biological laboratories, hospital operating rooms, food industry, cosmetics industry, etc.
H13 H14 V-Bank HEPA filter With Plastic Frame also has a good effect on air purification in offices and hotels. Therefore, for the above occasions, the high efficiency filter can be used as the final filter. It can guarantee the cleanliness requirements above 100,000.
The structure of H13 H14 V-Bank HEPA filter With Plastic Frame:
Partition
Corrugated aluminum foil partitions or paper partitions can accurately maintain the spacing of the pleats. With minimal resistance, the filter material can be used to the fullest. In corrosive environments, vinyl-plated partitions can be used. The edges of the partitions can be cut to prevent The filter material is damaged. The thickness of the aluminum foil is 0.03mm and the corrugation height is 4mm, which can fully protect the area of the filter material and the light weight of the filter.
Sealant
The filter material is completely sealed with viscose in the plastic frame to prevent side leakage. The sealing layer completely seals the edge of the filter material and the partition. That is, it seals all the channels that may leak. The polyurethane viscose used in the standard H13 H14 series filters penetrates into the filter material to prevent the generation of voids. The polyurethane lipid is soft and elastic, which can effectively prevent cracking and vibration damage during transportation.
Frame
The frame is made of (18mm) or 16 (mm) thick plastic frame, and the joints are connected by glue and self-tapping anti-vibration nails to ensure its firmness.
Gasket
The closed-cell EVA gasket can be sealed with dry air tightness to prevent side leakage of the filter. The standard is 18mm wide and 6mm thick. Silicone sealing gaskets can also be used. There is no partition and it can be formed integrally by polyamino acid foaming. The foaming machine runs on the XY axis and runs automatically. The sealing effect is quite good.
Wedge folds
The filter material is folded 180 degrees on both sides to form a wedge-shaped pleated layer. When the filter material is bent, there are two indentations, so that a wedge-shaped box fold layer is formed at the end of the partition. The wedge-shaped box fold layer can prevent the filter material from being damaged. Some filter manufacturers use single-indentation or roll-mark filter pleats, or even simply origami paper manually. In this inert condition, the filter material is easily damaged by the sharp top of the corrugated partition. Or damage the filter paper during excessive handling.
Filter material
The H13 H14 series of filter media are high-density paper made of ultra-fine glass fiber. The filter media is pleats to maximize the effective filtration area of the filter media, thereby reducing the filtration rate of the filter media. This is very important for high efficiency filters. H13 H14 wave fiber filter material is waterproof and flame-retardant and can be suitable for high temperature of 1000° F (538° C);
Features of H13 H14 V-Bank HEPA filter With Plastic Frame
► Large filtering area, low resistance and long service life.
► With 25mm thick mounting flange frame.
► The maximum temperature of continuous operation is 80°C.
► Test each unit before leaving the factory.
► Filtration efficiency: H13, H14 (EN1822).
H13 H14 V-Bank HEPA filter With Plastic Frame specifications and technical parameters
Note: Special Size Available Upon Request.
H13 H14 V-Bank HEPA filter With Plastic Frame refers to the H13 H14 V-Bank HEPA filter with a (18mm) or 16(mm) thick plastic frame.
H13 H14 V-Bank HEPA filter frame is divided into: plastic frame, galvanized frame, aluminum frame, stainless steel frame, etc. H13 H14 V-Bank HEPA filter With Plastic Frame is commonly used.
H13 H14 V-Bank HEPA filter With Plastic Frame is suitable for use in research and production departments with various processes requiring cleanliness below 100,000 (dust particles <0.5μm). Because this filter has good bacteria filtering performance, it is especially Suitable for pharmaceutical industry, biological laboratories, hospital operating rooms, food industry, cosmetics industry, etc.
H13 H14 V-Bank HEPA filter With Plastic Frame also has a good effect on air purification in offices and hotels. Therefore, for the above occasions, the high efficiency filter can be used as the final filter. It can guarantee the cleanliness requirements above 100,000.
The structure of H13 H14 V-Bank HEPA filter With Plastic Frame:
Partition
Corrugated aluminum foil partitions or paper partitions can accurately maintain the spacing of the pleats. With minimal resistance, the filter material can be used to the fullest. In corrosive environments, vinyl-plated partitions can be used. The edges of the partitions can be cut to prevent The filter material is damaged. The thickness of the aluminum foil is 0.03mm and the corrugation height is 4mm, which can fully protect the area of the filter material and the light weight of the filter.
Sealant
The filter material is completely sealed with viscose in the plastic frame to prevent side leakage. The sealing layer completely seals the edge of the filter material and the partition. That is, it seals all the channels that may leak. The polyurethane viscose used in the standard H13 H14 series filters penetrates into the filter material to prevent the generation of voids. The polyurethane lipid is soft and elastic, which can effectively prevent cracking and vibration damage during transportation.
Frame
The frame is made of (18mm) or 16 (mm) thick plastic frame, and the joints are connected by glue and self-tapping anti-vibration nails to ensure its firmness.
Gasket
The closed-cell EVA gasket can be sealed with dry air tightness to prevent side leakage of the filter. The standard is 18mm wide and 6mm thick. Silicone sealing gaskets can also be used. There is no partition and it can be formed integrally by polyamino acid foaming. The foaming machine runs on the XY axis and runs automatically. The sealing effect is quite good.
Wedge folds
The filter material is folded 180 degrees on both sides to form a wedge-shaped pleated layer. When the filter material is bent, there are two indentations, so that a wedge-shaped box fold layer is formed at the end of the partition. The wedge-shaped box fold layer can prevent the filter material from being damaged. Some filter manufacturers use single-indentation or roll-mark filter pleats, or even simply origami paper manually. In this inert condition, the filter material is easily damaged by the sharp top of the corrugated partition. Or damage the filter paper during excessive handling.
Filter material
The H13 H14 series of filter media are high-density paper made of ultra-fine glass fiber. The filter media is pleats to maximize the effective filtration area of the filter media, thereby reducing the filtration rate of the filter media. This is very important for high efficiency filters. H13 H14 wave fiber filter material is waterproof and flame-retardant and can be suitable for high temperature of 1000° F (538° C);
Features of H13 H14 V-Bank HEPA filter With Plastic Frame
► Large filtering area, low resistance and long service life.
► With 25mm thick mounting flange frame.
► The maximum temperature of continuous operation is 80°C.
► Test each unit before leaving the factory.
► Filtration efficiency: H13, H14 (EN1822).
H13 H14 V-Bank HEPA filter With Plastic Frame specifications and technical parameters
|
Specification Width × height × depth（mm） |
Diaphragm | Filter area(㎡) | Dust holding capacity(g) | Air volume(m³/h) | Initial resistance (when face wind speed is 0.5m/s) | Final resistance | Filtration efficiency |
| 285×285×295 | 2 | 5.7 | 380 | 700 | ≤220Pa | 400-600Pa | H13 H14 @0.3μm |
| 595×595×295 | 3 | 17.8 | 1180 | 2100 | ≤220Pa | 400-600Pa | |
| 595×595×295 | 4 | 23.8 | 1570 | 2700 | ≤220Pa | 400-600Pa | |
| 610×610×295 | 5 | 30.4 | 2010 | 3500 | ≤220Pa | 400-600Pa | |
| 915×610×295 | 6 | 36.5 | 2410 | 4200 | ≤220Pa | 400-600Pa | |
| 484×484×295 | 3 | 13.65 | 819 | 1500 | ≤220Pa | 400-600Pa | |
| 610×305×295 | 5 | 14.95 | 875 | 1600 | ≤220Pa | 400-600Pa | |
| 305×610×295 | 3 | 17.1 | 1026 | 1800 | ≤220Pa | 400-600Pa | |
| 630×630×295 | 5 | 29.41 | 1765 | 3200 | ≤220Pa | 400-600Pa | |
| 600×600×295 | 5 | 28.04 | 1683 | 3000 | ≤220Pa | 400-600Pa | |
| 570×570×295 | 4 | 21.34 | 1280 | 2300 | ≤220Pa | 400-600Pa | |
| 320×320×295 | 3 | 9.17 | 550 | 1000 | ≤220Pa | 400-600Pa | |
| 510×510×295 | 4 | 19.33 | 1160 | 2100 | ≤220Pa | 400-600Pa | |
| 610×484×295 | 5 | 22.75 | 1365 | 2500 | ≤220Pa | 400-600Pa | |
| 490×595×295 | 4 | 22.25 | 1335 | 2400 | ≤220Pa | 400-600Pa | |
| 595×490×295 | 4 | 18.42 | 1105 | 2000 | ≤220Pa | 400-600Pa |
Note: Special Size Available Upon Request.
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
