PTFE HEPA Air Filter
Material:Multiple materialsFilter Type:
Car Fitment: /
Size: Standard
Color Customers\' Require
Package: Customized/Neutral
Filtration Efficiency: U16(EN 1822)99.99995% at MPPS(0.12um)
Sample: Avialable/Free
Place of Origin: CHINA
PTFE HEPA Air Filter
PTFE ultra-efficient partitionless air filter is made of ultra-fine glass fiber paper, etc., using hot sol as the separator, and combined with a metal outer frame. Mainly collect dust particles below 0.12um.
Features:
Large dust holding capacity, high filtration efficiency, low resistance, low operating cost, small and compact structure, light weight and convenient installation.
Main application:
It is used for the installation of the air outlet at the end of the clean room, FFU, clean equipment, etc., as well as the air supply system with higher requirements.
Performance description
Frame: Aluminum alloy
Filter material: ultra-fine glass fiber filter paper, PTFE
Filter separation: hot melt adhesive
Protection net: plastic spray net, aluminum alloy diamond net
efficient
U16(EN 1822)99.99995% at MPPS(0.12um)
Continuous operating temperature: ≤80o C
Humidity resistance: ≤80% RH
Recommended maximum final resistance: ≤580 Pa
Application Appcation
◆Suitable for occasions requiring large air volume, high production temperature, and steam without boron; usually used for automobile filter elements and purifier filter elements
Features
◆F6~U17 filtration efficiency grades can be made, and different grades are suitable for different requirements
◆The chip adopts a fully automatic computer control system to spray glue and fold, the folding peak height range can be steplessly adjusted between 15~96 mm, and the width can reach 1220mm
◆Light and thin, light weight, good sealing, compact structure, convenient installation, high efficiency, low resistance and low operating cost
◆Temperature resistance: ≤ 90℃
◆Each unit is strictly tested and delivered according to EN1822:2009 standard
◆Any size can be customized
Material
◆Outer frame: anodized aluminum profile, stainless steel, plastic frame, etc.
◆Filter material: PTFE (stable performance), low pressure loss, high efficiency, good strength, long service life
◆Separator: hot melt adhesive
◆Protection net: flattened aluminum net, white paint net (increase strength)
◆Sealant: Polyurethane (no odor)
◆Sealing gasket: EVA, EPDM, CR
Common specifications and performance parameters
◆The final pressure drop is approximately
2-3 times the initial pressure drop, and the dimensions can be customized according to customer needs
Structure diagram
◆No. 1 frame: single-layer aluminum alloy profile
◆No. 3 frame: metal box type
◆No. 4 frame: metal single convex flange type
Performance curve diagram
PTFE ultra-efficient partitionless air filter is made of ultra-fine glass fiber paper, etc., using hot sol as the separator, and combined with a metal outer frame. Mainly collect dust particles below 0.12um.
Features:
Large dust holding capacity, high filtration efficiency, low resistance, low operating cost, small and compact structure, light weight and convenient installation.
Main application:
It is used for the installation of the air outlet at the end of the clean room, FFU, clean equipment, etc., as well as the air supply system with higher requirements.
Performance description
Frame: Aluminum alloy
Filter material: ultra-fine glass fiber filter paper, PTFE
Filter separation: hot melt adhesive
Protection net: plastic spray net, aluminum alloy diamond net
efficient
U16(EN 1822)99.99995% at MPPS(0.12um)
Continuous operating temperature: ≤80o C
Humidity resistance: ≤80% RH
Recommended maximum final resistance: ≤580 Pa
Application Appcation
◆Suitable for occasions requiring large air volume, high production temperature, and steam without boron; usually used for automobile filter elements and purifier filter elements
Features
◆F6~U17 filtration efficiency grades can be made, and different grades are suitable for different requirements
◆The chip adopts a fully automatic computer control system to spray glue and fold, the folding peak height range can be steplessly adjusted between 15~96 mm, and the width can reach 1220mm
◆Light and thin, light weight, good sealing, compact structure, convenient installation, high efficiency, low resistance and low operating cost
◆Temperature resistance: ≤ 90℃
◆Each unit is strictly tested and delivered according to EN1822:2009 standard
◆Any size can be customized
Material
◆Outer frame: anodized aluminum profile, stainless steel, plastic frame, etc.
◆Filter material: PTFE (stable performance), low pressure loss, high efficiency, good strength, long service life
◆Separator: hot melt adhesive
◆Protection net: flattened aluminum net, white paint net (increase strength)
◆Sealant: Polyurethane (no odor)
◆Sealing gasket: EVA, EPDM, CR
Common specifications and performance parameters
◆The final pressure drop is approximately
2-3 times the initial pressure drop, and the dimensions can be customized according to customer needs
Structure diagram
◆No. 1 frame: single-layer aluminum alloy profile
◆No. 3 frame: metal box type
◆No. 4 frame: metal single convex flange type
Performance curve diagram
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
